Industrial Air > Company Testimonials

Company Testimonials

What our clients think...




To whom it may concern

Industrial Air Systems NZ, supplied a complete Pneutech compressed air system to our Timaru based structural steel manufacturing site in August 2012. We have had the Alu Air aluminium piping system coming up three years now, and it has proven to be efficient and reliable throughout our 4200m2 workshop.

We would recommend this compressed air reticulation system to any company requiring a premium set up.


Yours Sincerely



Structural Steel Company







To whom it may concern

Industrial Air Systems installed the Alu Air piping system into our new animal supplements manufacturing facility, and it has worked extremely well, providing consistent air supply to all areas of our busy operation. Alu Air looks good, is leak-free and gives high effective air flow, and we recommend it.


Yours Faithfully



Animal Supplements Manufacturing Company







To whom it may concern

After exploring all the options regarding an air reticulation system for our new 6000mmanufacturing facility in Christchurch, we decided to enlist Industrial Air Systems to install their Alu Air compressed air piping system. The system incorporates pipe sizes from 25mm to 63mm, with approximately 30+ branches feeding our machines.

We used this system because Alu Air facilitates high flow rates, minimum pressure drop, minimal turbulence and offers corrosion resistant properties. Installation was no fuss and we now have a leak free system for many years to come.


Yours Sincerely



Plastic Manufacturing Plant







To whom it may concern

Industrial Air Systems installed the Alu Air aluminium compressed air piping system into our new commercial tyre shop, and it has worked a treat. Our demanding 3/4" impact guns get plenty of air supply, while all work points have sufficient and even compressed air flow to them.

We recommend Industrial Air and Alu Air piping as it hangs very straight, does not corrode, and is easily adapted at any point to suit workshop changes.


Yours Sincerely



Commercial Tyre Shop







To whom it may concern
 
Industrial Air Systems NZ, supplied a complete Pneutech compressed air system into our Timaru based structural steel manufacturing site in August 2012.
 
The package included a VSD rotary screw compressor, dryer system, filters for instrument grade air quality, and compressed air reticulation.  The complete system is entirely automated and looks after itself.
 
The system was supplied, installed and commissioned by Industrial Air Systems NZ, and to my knowledge provides a superior, cost-effective and reliable supply of compressed air to the entire shop.
 
We do not have standby compressors, and although very reliant on the compressed air, Industrial Air Systems ensure continuity of supply, even with routine service.
 
We have found Industrial Air to be good to deal with; the compressed air equipment seems to be top quality, while the company is very experienced and offers sound advice for optimum performance and longevity.
 
I am happy to recommend Industrial Air Systems as a turnkey compressed air system supplier, as they are not only proficient in their own field of compressed air expertise, but have the capacity to successfully manage projects involving sub-contractors.
 
They are a professional company, their integrity comes foremost, and we can know we can rely on them to deliver in every aspect required.


Yours Faithfully
 
 
 
Managing Director
Dairy factory structural steel supplier
 






To whom it may concern
 
Over the last three years we have purchased three Pneutech variable speed compressors from Industrial Air Systems.
 
These compressors are employed at three separate manufacturing factories where compressed air supply is critical, with two of these sites running 24 hour 7 day operations.
 
We have found the Pneutech machines to be very reliable performers, well-engineered and obviously designed for long term operation.
 
As a repeat customer we have no hesitation recommending Industrial Air Systems as an honest and creditable supplier.


Yours sincerely
 
 
 
Director
International transformer manufacturer






 
To whom it may concern

Industrial Air Systems NZ have supplied two Pneutech rotary screw air compressors into our production facility, a VSD model in 2011 and another fixed speed this year.
The compressors were both installed, programmed and commissioned by Industrial Air System’s local service technician team.
 
We are very reliant on a high quality compressed air supply for critical areas of our production process, and had had some issues with our previous compressed air system and supplier.  The Pneutech compressors and improved plant/reticulation layout have overcome these issues, and we now have a highly efficient and cost effective supply of air throughout our factory.
 
We have no hesitation recommending Industrial Air Systems NZ; their advice, their equipment and their experience have proven to be both reliable and beneficial to our production facility, and we continue to rely on their services.

Yours sincerely



Managing Director
Leading sheet metal fabrication shop –Christchurch

 





To whom it may concern
 
Industrial Air Systems NZ, installed a complete Pneutech compressed air system into our structural steel manufacturing site in September 2012.
 
The package included a large rotary screw compressor (approx 1000cfm) with separate VSD inverter control, compressed air dryer system, filtration system for class 2 air quality, air receiver bank, and compressed air reticulation.
 
The system was supplied, installed and commissioned by Industrial Air Systems (and their contract team) in a timely manner, and to date has more than met my expectations.
 
Due to an intermittent but high consumption blasting set up, our air requirement fluctuates from 25 to 80% of the full compressed air capacity, and the VSD control is ideally matched to suit this environment.
 
The air compressor is quiet and reliable, and on the occasions the compressor required a scheduled service, a back-up compressor was supplied and plugged in, to assure air continuity.  Although we have also installed a smaller standby compressor, we have not had to use it to date.
 
We have found Industrial Air Systems NZ to be an honest, straight forward and reliable supplier, with very good service turnaround, responding instantly to our enquiries.
 
The Pneutech compressed plant appears to be of very heavy duty and good quality, and with the company's expertise and experience, we have been able to equip our state-of-art workshop with a high performance and reliable compressed air system.
 
I am a happy customer and have no hesitation, recommending both Industrial Air Systems expertise and the Pneutech compressed air equipment to any manufacturing or processing plant, whose life blood is compressed air.


Yours sincerely



Managing Director
Christchurch based structural steel company







To whom it may concern, 
 
We are very reliant on a high quality compressed air supply for critical areas of our production process, with reliability and performance of equipment and availability of technical back up and service all being very important to us. 
 
In 2012 various items of our air supply system had reached the end of their useful life and needed to be replaced. After quite extensive research into what was available we engaged Industrial Air Systems NZ to supply and install a Pneutech rotary screw VSD air compressor and compatible dryer into our production facility. The compressor was installed and commissioned by Industrial Air System’s local contract service technician. 
 
The new compressor promised significant cost advantages both in capital outlay and ongoing running costs compared to packages we were offered from other suppliers, and the installation was performed very professionally and effectively. We are very pleased with the actual installed performance of the equipment. 
 
I have known the team at Industrial Air Systems NZ and the managing director personally for almost 20 years and have no hesitation recommending their advice, equipment and their experience in the compressed air industry, to any company requiring a high level of expertise and reliability. 
 
 
Yours faithfully

 
 
Director
Australasia’s leading stainless tube bend manufacturer- Wellington
 
 
 


 
 
 
 
 

Need a Quote?

Response within 10 minutes!
Mon-Fri (8am - 5pm NZT)

Fields marked with * are required.








Captcha *
 Security code

Want to receive helpful tips and the latest promotions? Join our mailing list...
 
 Security code

This page is best viewed in an up-to-date web browser with stylesheets (CSS) enabled. While you will be able to view the content of this page in your current browser, you will not be able to get the full visual experience. Please consider upgrading your browser software or enabling style sheets (CSS) if you are able to do so. The latest version of Firefox, Safari, Google Chrome or Internet Explorer will work best if you're after a new browser.